Do you know Ekgas autmatic burner controler ?

Technical indexes:

Power supply: AC 220V±10% 50Hz

Ambient temperature: -20℃+60℃ without condensation

Flame detection current: Adjustable between 2-20μA

Protection grade: IP40

Ignition cable: <5m (temperature resisting high-voltage line)

Cable length: For electrode ionized detection mode: max. 75m; for UV detection mode: max. 100m.

Wiring instruction

Wiring terminals:

Live wire (L)

Zero line (N)

Pressure alarm and ignition power supply switch.

Remote controlled resetting and ignition switch (constant on, NO contact)

Detection electrode current input signal uA (DC), cannot be laid together with other voltage lines to prevent interference.

UV power supply (L)

Earth wire (PE), must be connected to the general earth wire of the electric cabinet.

Extinguishment alarm output signal, remote ignition failure signal (passive NO contacts)

Power supply for external high-voltage transformer (live wire).

Internally short connected, power source to the solenoid valve (live wire).

Output signal for successful remote ignition flame (passive NO contacts).

Instruction of control panel

Fixation screw hole

Power indicator

Power switch

Extinguishment alarm indicator

Combustion indicator

Fixation screw hole

Installation and wiring diagram