How to choose an industrial gas burner?

Brief step-by-step guide to choosing an industrial gas burner:
1. Define the process requirements
• Required heat duty (kW, BTU/h) and peak vs continuous load.•

Operating temperature range and duty cycle.
• Type of process (furnace, oven, kettle, dryer, boiler, incinerator).
2. Confirm available fuel and quality
• Natural gas, propane, biogas, syngas, hydrogen, LPG, etc.
• Supply pressure, calorific value, contaminants (H2S, moisture), variability.
3. Chooseburner type by application
• Atmospheric/pilot burners for low-pressure natural gas.
• Forced-draft or power burners for higher capacity and controlled combustion.
• Low-NOx or staged/venturi burners for emissions-sensitive applications.
• Radiant tube, surface, or flameless (MILD) combustion for special heat transfer needs.
4. Size and capacity matching
• Match burner heat output to calculated heat duty with margin for control range (turn-down ratio).
• Consider turndown (range between max and min output) to handle part-load operation.
• Request performance data, test reports, and reference installations.
Quick recommended workflow
1. Gather process data and fuel specs.

2. Calculate heat duty and turndown needs.

4. Get vendor proposals with performance curves, emissions

Get vendor proposals with performance curves and  emissions and

control options and O&M requirements.

Review, test/commission, and tune on site

Phone: 86 185 6630 3837
WhatsApp: 86 185 66303837
Email: ekelairn@gmail.com
Web.: http://ekgas.com