Check before installation: confirm that the type of electromagnetically operated valve matches the type of gas and the diameter of pipeline; Check that the valve body is not broken, the seal is intact, and the junction is not loose.

The specification for installation:

– Installed in the direction of the valve arrow (consistent with the direction of gas flow) and not reverse;

– Install in a ventilated, dry place, away from sources of high temperature, and avoid direct sunlight or humid environments;

– If there are impurities in the pipe, it must be cleaned before installation to prevent impurities from blocking the valve.

Power operated:

– Before using it for the first time, first press the “reset button” manually (in some models), and then turn on the electricity. Hearing the “click” means the valve is open;

– When equipped with gas alarm, the alarm detects leakage (excessive concentration) and triggers the electromagnetically operated valve to shut down. Reset the alarm and restart the electromagnetically operated valve after eliminating the leakage.

Daily Use:

Ekgas is recommended to close the main valve in front of the electromagnetically operated valve or disconnect the power supply of the branch electromagnetically operated valve if the gas is not used for a long time.

– Avoid frequently disconnecting the power supply to prevent the frequent action of the valve from shortening its life.